|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
| uk.rec.cars.vw.watercooled (VW Water-Cooled Cars) (uk.rec.cars.vw.watercooled) |
| Tags: 2002, front, passat, suspension |
|
|
Trackback | Thread Tools | Display Modes |
April 5th 07, 03:02 PM
posted to uk.rec.cars.vw.watercooled
|
|||
|
|||
2002 Passat front suspension
I'm about to change the front springs on my Passat I checked to see what I
need to do for the job and I note that the upper spring plate needs to set at 11 deg ± 2 deg. I assume that if I place a mark on the plate and other related parts with paint when I reassemble the strut as long as the paint marks are aligned then the upper spring plate will be set back to 11 deg ± 2 deg or will I have to make a jig of sorts to set this angle. 
|
| Ads |
|
April 11th 07, 12:34 AM
posted to uk.rec.cars.vw.watercooled
|
|||
|
|||
|
2002 Passat front suspension
"Ralph Bayley" wrote in message ... I'm about to change the front springs on my Passat I checked to see what I need to do for the job and I note that the upper spring plate needs to set at 11 deg ± 2 deg. I assume that if I place a mark on the plate and other related parts with paint when I reassemble the strut as long as the paint marks are aligned then the upper spring plate will be set back to 11 deg ± 2 deg or will I have to make a jig of sorts to set this angle. www.passatworld.com is probably where you need to ask.... I.
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
