Fuel Ration Book - possibly from war/post war UK http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6530110852&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1 Happy bidding

"Grimly Curmudgeon" wrote in message ... Some lamps for Howard... An evident *Cock-sucker* then?

OK, so not strickly a true classic yet, but I'm sure in a few years all the GT4 models will be, even though it is Japanese. It has a problem. Although the door seals are in very good condition, it is a frameless door design. It lets in a lot of wind noise. Ironically to worst area isn't arround the windows, but at the lower leading edge of the door (I can feel the breeze blowing up between...

I know this has been discussed before, but I remain puzzled. The 15-year rebuild of my Mk 1 Sprite is finished, except that the master cylinder has gone rusty - again! First of all I honed out the brake and clutch bores, assembled the unit, wrapped it up and stored it away in the house. When I assemble the system I found the bores had rusted in storage. So I honed it again. By this time I...

Hi all, OK, so the shame of my life is that i've left my TR6 standing for the last year (not my fault - honest) - but now I have to get it moved (by the 26th May). Now of course that damn thing wont even think about starting. It cranks's over, but no hint of it starting and I really don't know enough about cars to get them going again!

Alldata 2004, , , Mitchell CDs, year 2005 - 2003 , 53 CDs, total 107 CDs ----------------------------------------------------------------------------------------------------- Alldata 2004, , ARRIVED IN BETWEEN 31/MAY/2004 to 28/JUNE/2004 FULLY FUNCTIONAL, AND GOOD FOR UNLIMITED SEATS.

See http://tinyurl.com/8ncen

has anyone seen one of these fitted? I have most of the parts in kit form, but the bigger front pulley will be just touching the front crossmember by the look of it, any ideas? I could cut out the crossmember like on the Big Healey, but I'm not sure if that is wise.... or I could make some kind of tie bar to hold the engine back a few millimeters. what is the recommended way? Charlie

Does anybody have any online reference for a listing of the old two-letter area codes for pre-65 registrations? I'm trying to find a listing of the old area codes, where they were issued from etc etc, and preferably which ones are currently being re-issued as age-related or "new" plates. The usual searches on google etc produce reams of information about companies selling plates, which I...

yo madda yandavals, homie me all to yas, bring it on fellow, dude ma pickya cross white 5 with riches as pearl as crack me really is of needa norbert fullyob with yoghurt curtan yallafinicle for a prop on a tr6 and need a pair of hooficufs for a brakeysesseh on a tr4 parts for swellying on a nuff, no welly as yo got a nice dealimonity e type bonnet great, poo shina, muff specca, no totty...

Hi, Ok maybe not a classic, debatable! But due to buying a Triumph 2000 my trusty old and rusty acclaim is on ebay, gotta be a good runaround for someone. She is a good old motor and id like to see her go to a good home. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4544098123

....was always full of dubious child abusing and suspect homosexual *******s anyway Now I'm back, let the fun regain, most of the arseholes are probably dead and gone anyway, rot in hell you piles of ****

Ive got an S Reg MGF and I was just wondering if the death of MG Rover will mean parts become impossible to get or if other companies will just end up buying the rights and manufacturing spares? ....MG Rover is not the first company to go to the wall, so what has happend in the past? Also, I will be selling it this summer and current cars for sale in Auto Trader etc suggest that I could...

On Sun, 24 Apr 2005 18:58:56 +0100, Grimly Curmudgeon wrote: Some lamps for Howard... http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=9903&item=7969811715&rd=1 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=9903&item=7969812729&rd=1 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=9903&item=7969815847&rd=1

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6527162765 ....also the unsold Morris Minor parts and manuals are on there, see my full list by searching under 'Advanced search' and then put the user ID: chrisnd2 in the 'From specific sellers...' box. (Any relisted items will end up at the tip after this...) TIA

Apologies if this is the wrong group :) Feel free to point etc. We are interested in hiring a sports car to drive from the UK to Italy (attending a wedding) and back again. Anyone done this? Classic would be nice but modern will do (Porsche being preferred). I would actually prefer to get on the ferry etc. and hire a left hooker in France; I find it easier to drive a 'local' car rather than be...

The steering wheel centre with indicator switch and horn push on my old MG are bakelite, does anyone know the best way to clean this stuff up? There is also a small crack in the indicator switch, can I fill it with anything? Cheers, Pete W

Hi People I need to move a Herald from Fife to Galloway. Anyone interested in sharing costs to do another trip in the same sort of area at the same sort of time? Anyone need to move a car from Carlisle or Newcastle to Scotland? Ian --

FOR ALL MG/ROVER ENTHUSIASTS WORLDWIDE - SAVE MG ROVER WITH PLEDGE INVESTMENT MG Rover, Britain's last volume car/automobile manufacturer was forced into Administration on 8 April 2005. As a philanthropic organisation dedicated to the survival of the MG and Rover marquees, Save MGR would like to take this opportunity to invite "pledge investors" to pledge their potential investment in...

1972 (pre road tax) Mk4 1300. Never completed rolling restoration looking for new home. Garaged for last 14 years. More details at www.AssociatedData.co.uk/triumph/ Call Nick on 01708-378800 (day & evening) Location: Romford, Essex.