|
|
MGF Damaged Car Salvage by
MGF Salvage
MG Rover - MGF Damaged Car Salvage frontal damage walk around
http://www.youtube.com/watch?v=bqW3LiUePhs
--
Regards,
|
December 11th 06 09:04 PM
by Pete M
|
7 |
12 |
|
|
GODDAMNED RUST by
Conor
Goddamned Christine. Never before has a car been so deserving of the
name.
After setting up the timing on my new Aldon ignition I've just fitted
to the Capper and shutting the bonnet, I noticed the tell tale sign of
rust - two small finger nail paint blisters just starting to show to
the right of where the worst bit on the bonnet was when I had it
resprayed. The bit that was leaded is fine....
( 1 2)
|
December 11th 06 11:53 AM
by Conor
|
17 |
24 |
|
|
Removing 1st gear from mainshaft of OD Spit? by
S1500
Wow, my tranny rebuild has come off to a hellish start.
There's no way in hell I've been able to just tilt & ease out the
mainshaft and I'm done. Nope, things got in the way. No clearance.
So, with that in mind, how do you get the 1st gear off the mainshaft? It
slides a bit as it should, but it stops when you get to the mainshaft
part where splines start up again. Yet, the diameter of the...
( 1 2)
|
December 11th 06 06:05 AM
by S1500
|
13 |
26 |
|
|
Leather by
Doki
I've got a modern Jag driver's seat that's a bit worse for wear. Liquid
leather has rejuvenated it a bit, but on the bolster where it's rubbed by
the driver getting in and out, it's still a bit ropey. The top surface of
the leather looks like it's been abraded away. Is there a cure for this sort
of damage or is it just somtehing you have to live with?
( 1 2)
|
|
16 |
29 |
|
|
|
November 30th 06 07:02 PM
by Dave
|
7 |
16 |
|
|
VALUATION: MERCEDES 4-MATIC ESTATE G REG by
Ian Haig
CROSS POSTED FROM uk.adverts.cars
-------------------------------------------
A colleague at work (TRING/AYLESBURY) is looking to sell the following car,
and would like an idea of its sale price (or even offers!) : -
300TE Mercedes Estate 4-Matic four wheel drive.
6 cylinder 3 litre petrol
1989/90 G reg,
107,000 miles
|
|
8 |
9 |
|
|
|
November 28th 06 05:03 PM
by needles
|
157 |
158 |
|
|
USE £6 TO MAKE THOUSANDS by
Jim
You may have read these letters asking you to send £1 to 6
different addresses. Putting your home address on the internet can be
risky, but through PayPal all you have to provide is your email
address. Its safe and easy. Just go to use the link below and set up
your account! I am not a gullible person and have never trusted things
like this, but I gave it a try, hey its only £6, I figured at...
|
November 24th 06 08:13 AM
by Clive
|
1 |
6 |
|
|
Rover 800 Diesel MK1 - Brake Master Cylinder by
Classic Car Man
I'm trying to find a replacement master cylinder or repair kit for my 1990
MK1 rover 800 diesel WITHOUT ABS.
Rover (dealers?) can't help, they can only supply 4 seals not the complete
repair kit including piston as Rover is now dead, I've tried EBAY and
others.
My only hope is that someone is breaking a late MK1 with a good brake master
cylinder.
( 1 2 3)
|
|
21 |
22 |
|
|
Classic versus modern by
Willy Eckerslyke
We had two car faults yesterday - wife's Passat threw off it's
alternator belt and my Rover P6 developed an ominous clicking from a
front wheel. No prizes for guessing which of those sounds the most
expensive to sort out.
Except you'd be wrong (probably).
Bloody Passat had cracked it's alternator's casing, costing a cool 175
quid to replace (too much of a hurry to shop around, and no good for...
|
|
0 |
9 |
|
|
Classic Saab 900 wheel needed by
Classic Car Man
Due to poor road maintenance and hitting a waterfilled pothole, we now need
a wheel (steel or alloy) 5.5Jx15 for a 1986 Saab 900. The PCD is 4x114, ET40
with a centre hub of 70mm
Please only reply if you have one or have contact details of someone who
has. And yes I've spent all week on the phone and have tried the breakers,
Saab dealers and the 'experts' that I've been given
We can collect...
( 1 2)
|
November 21st 06 11:46 PM
by Mike P
|
11 |
15 |
|
|
Electronic injection inlet manifold for triumph herald by
Jeppe Holm
Hi
My dad bought a mk 4 spitfire with a herald engine. Since this i a
single carb engine, and not the original, I would like to make
electronic fuel injection for it. But is there anyone who has made an
inlet manifold for minimum two injectors?
/Jeppe Holm
|
|
5 |
9 |
|
|
identify this car? by
Chris Lewis
Please could you help to identify this car and the approximate year of
manufacture? I am trying to age an old photograph that I have.
http://img157.imageshack.us/img157/9206/cared2.jpg
|
November 19th 06 06:06 PM
by Pete M
|
9 |
17 |
|
|
Glass's Gudie for Sale by
IanL
Hi There
I have obtained and are selling a number of Glass's Guides
Here are three of them.
I have September / October & The current Month November
Thought someone might be interested.
|
November 14th 06 01:47 PM
by IanL
|
0 |
10 |
|
|
Jackall system refurb.... by
Classic Car Man
Can anyone tell me where I can get the rams (legs) for my Jackall system
refurbished?
I know they are old, and every hydraulic company that I've contacted has
declined to help.
The rams do move under the pumps pressure, so I guess a new set of seals all
round may be the answer.
|
|
2 |
6 |
|
|
looking MGB gt by
billy
looking for a 60s or 70s MGB gt if anyone has one for sale
|
November 5th 06 11:41 PM
by Me
|
4 |
14 |
|
|
|
|
4 |
5 |
|
|
Howdy by
Dean Dark
On Sun, 21 Oct 2007 23:44:49 +0100, "Howdy" Jfd.@goofmybom wrote:
serachin for my mate mike dean, given a bitta **** over the last ten years
to a good buddy of mine
i'm in the UK for 6 months on work soon from the good old US of A i need to
teach this guy a lessin, any address or zip code?
Nope, but good luck finding him. This may not be the best place to
start your search for him,...
|
|
2 |
20 |
|
|
Ford Cortina 1969 by
Mo
I have just obtained an old Ford Cortina 1969 and I am looking for a
maintenance manual for it. Can anyone help?
|
November 3rd 06 11:37 AM
by Mo
|
4 |
11 |
|
|
Best sites for buying TR6? by
TrentSC
I'm looking to buy a 1971/72 TR6 and have been ambling around the net for
good sites that advertise them. Apart from the obvious (autotrader, ebay,
exchange & mart), which sites would the group suggest I try?
TIA
|
|
2 |
12 |