"James" wrote in message
...

"Doki" wrote in message
...

"James" wrote in message
...
Hi mate,

I was just browsing air compressors out of curisity and found
http://www.aldi.co.uk/uk/html/offers/58_5174.htm just wondering what you
think and if it would conformtable power spray guns and mini ones ?

Couldn't see the cfm rating though.

Don't worry not shelling out on one, still sticking with aerosoles for
this project just wondering.

I've got that exact machine in my shed. There's an equivalent figure -
270 litres per min. If I recall correctly, that's about equivalent to
8.5cfm (cubic feet a minute), so yes, it'd run a spraygun for small jobs.
I'd not use it to spray a car, but I'd be happy to do a bumper or a door
with it. The spraygun that comes with it looks just about OK for use as a
primer gun, which is a bonus. IIRC my Devilbiss is rated as using about
14CFM, but in practice it never uses that, as you probably only have the
trigger depressed about 70% of the time, and if you're only doing small
panels you'll only do a few swipes and then you're waiting for the paint
to flash off.

As I said before, the same kit is sold by wolf air for around £100. It's
certainly much better value than the cheap machine mart compressors.



Ahhh I see, I couldn't see what the 270 figure mean;t. Looks good and has
a bit of kit with it which is nice. If aldi start that offer up again I
might snag one up for the future, might be handy and not a kings ransom.

I had a look on the machine mart website at
http://www.machinemart.co.uk/shop/pr...th/airmaster-2
which looked good. Which is £94.33 with delivery.






Forgot to add: Found this on my travels
http://www.omegawolf.co.uk/powercraft/ the 270 turns out to be 9.5CFM so
pretty good.